Product news, exhibitions, announcements, and technical updates — all in one place.
9/29/2026 · product
AimFactoryCore saves every recipe and settings file atomically. If the app is killed or power drops during a save, the file is always left in a complete state, and if corruption is detected the last good copy is restored automatically. Once a day at startup the full recipe set is archived, keeping the latest 30 snapshots.
9/29/2026 · product
See the coordinates and handling state the vision system sent to the robot, inside the software. The command channel and the data channel flow side by side with timestamps, and connects and disconnects appear in the same stream. No external packet analyzer or separate test tool is needed.
9/29/2026 · product
Choose how to connect to the upstream PLC: hard-wired DIO, TCP socket commands, or Modbus TCP slave. A cell without a DIO board runs on a single Ethernet cable, and because all three channels share the same execution core, switching the connection method later does not change how the line behaves. On Modbus, the PLC is the master and AimFactoryCore is the slave.
9/29/2026 · product
In a Hyundai Robotics configuration, a recipe change request writes the robot program to the controller first, and the vision recipe is applied only after verification succeeds. If it fails, the previous recipe stays in place and an alarm is raised. The window where only the robot runs an old program is closed by sequence, not by operator attention.
9/3/2026 · product
When part height changes, the same pixel maps to a different millimeter, and the error grows toward the edge of the field of view. AimFactoryCore recalculates coordinates from the entered product height and working distance, so parts at the edge of the pick area are picked with the same precision without per-height calibration data. Height is stored in the recipe.
9/1/2026 · product
AimFactoryCore's dedicated Agilebot integration: send up to 6 picks to the robot from a single capture and verify the transfer with logs and read-back. PC-screen jogging, a BAS script editor with right-click commands and automatic syntax checks, and a live status panel.
8/18/2026 · product
AimFactoryCore's dedicated Hyundai Robotics integration: edit Hi6 JOB scripts inside the vision screen, read uploaded programs back and compare them to the original, and verify the robot first on every recipe change. Includes Modbus start/stop and tool-calibration coordinate capture.
8/4/2026 · product
A summary of the seven AimFactoryCore releases from the first shipped build 0.1.0.1 (July 8) to 0.1.0.7 (July 31): selectable IO/TCP/Modbus control channel, robot-first recipe changeover, up to 6 picks per capture, crash-safe saving, and an English UI with 23 English manuals. Each item links to its own article.
5/13/2026 · product
AimFactoryCore is AIM's integrated control platform that replaces the legacy RoboEYE software, managing robot read/write, vision recipes, and UniFeeder control in one place.
