AIM FACTORY AUTOMATION
The camera finds the part. The robot picks it.
No need to lay parts out neatly. AimFactoryCore, our industrial robot vision, locates each part and tells the robot where it is.
See if it fits your lineWhy AIM
Up to the robot, from one place.
We don't stop at the feeder, the vision, or the robot. One team that handles all three takes it from deployment to support.
Any Robot
Any robot.
Hyundai Robotics and Agilebot are driven directly; every other brand connects over standard communication.
Dedicated integration · 2 brands
Standard integration
- + 5 brands
Trusted by
From Korea's largest companies to global manufacturers.
Exported to 8 countries
High-mix
High-mix operation experience
Per-product conditions are managed as a Recipe. A new part is registered in one place — not fixed in three.
0.01–125mm
Measured part range
From 0.01 mm thin films to 125 mm medical parts — actually imaged and handled.
Hard-to-feed parts
Tangled, overlapping, elastic parts
Even overlapping or flipped parts are sorted by shape and orientation with vision.
Cases
Running on the floor.
Lines built together with machine builders. What the part was, how it was handled, and what changed — written as it happened.
Electronic component manufacturing
4×6 mm clear silicone, in the customer's existing trays
A part a vibratory feeder could not supply at all. The system reads the groove orientation and places it straight into the trays already in use.
- 0% defects · 0% line stoppage
- 30–40 parts per minute
- Replaced 6 operators (day/night)
Electronic component manufacturing · IAI
0.3 mm SMD, from pickup to reel taping
Picked with dual cameras, with the rotation error introduced during pickup corrected — inspection and reel taping run as one flow.
- Pickup/insertion error ±0.05 mm
- Defect rate 0.001% or below
- Cycle time cut by 70%
Automotive parts · Hyundai Robotics HH7
Hyundai Robotics HH7, 5-minute changeover for high-mix parts
Change the robot and the screen stays the same. Change the part and only the recipe changes before the next run.
- Alignment accuracy ±0.2 mm
- Defect rate 0.1% or below
- Changeover time cut by 80%
Product Log
The product keeps growing.
What the floor asks for becomes the next version. We keep refining it so it takes less effort and works the way you already work.
- Recipes survive a power cut in the middle of a save
- See what was sent to the robot, on screen: the communication log window
- No DIO board, one Ethernet cable: the three AimFactoryCore control channels
- Change the part, and the robot changes first: if verification fails, the previous recipe stays
- No recalibration when the part height changesEnter the product height and the coordinates are recalculated.
Exhibitions
See it running at a show.
We bring working equipment to exhibitions — sometimes at our own booth, sometimes alongside our robot partners at theirs.
Nov 2026
SMATEC — Smart Factory & Production Automation Show
Suwon Convention Center · partner booth
Ask about a visit →Past exhibitions
- Mar 2025AW2025 Smart Factory + Automation WorldCOEX · Hyundai Robotics · Yamaha · Zeus booths
- Jan 2025NEPCON Japan 2025Tokyo · joint exhibit with Technohands Korea
- Nov 2024SMATEC 2024 Production Automation ShowSuwon Convention Center · AIM booth
- Oct 2024Daegu International Robot Industry ExpoDaegu · with ABB · Hyundai Robotics
- Apr 2024Korea Electronics Manufacturing ShowCOEX · FeederBot · AIVE 2.2 unveiled
Loading…
See the performance difference on your own line.
Request a demo test with your actual parts, and we'll propose a solution against your target performance.
Have questions before you start? See the FAQ.
Phone: +82-31-548-0748 · Email: sales@aim-fa.com